Dichlorodifluoromethane  Thermodynamic & Transport Properties
CAS Number
Name
Category
Pure Or Mix Name
English Full Name
Chemical Formula
Molecular Weight
Synonym Halon,Fluorocarbon_12,Genetron_12,Freon_12,Genetron_12,Halon,Freon_12,Propellant_12,Propellant_12,Refrig-12,Algofrene_Type_2,R-12,Dichlorodifluoromethane,Difluorodichloromethane,Difluorodichloromethane,Fluorocarbon_12,Algofrene_Type_2,Dichlorodifluoromethane;dichloro difluoro methane; difluoro-dichloromethane; Ethane,1,1-dichloro-1,2-difluoro; dichlorodifluoroethane; 1,1-Dichlor-1,2-difluor-ethan; sGPBADJHtaYCHiCUP@; Methane, dichlorodifluoro-; 1.1-Dichlor-1.2-difluor-aethan; 1,1-dichloro-1,2-difluoro-ethane;
Molecular Weight
Normal Boiling PointNormal Boiling Point
Critical Temperature Critical temperature
Acentric FactorAcentric Factor
Dipole Momentdipole moment
Heat of Formation J/mol
Heat of Combustion J/mol
Composition
Dichlorodifluoromethane :Introduction
Calculation Model :
Based on Mars Model
Temperature =
Pressure =
Specific Enthalpy =
Specific Entropy =
Reference
Please Login before calculating Loginor Register
Dichlorodifluoromethane :Thermodynamic & Transport Properties Calculated Result
Physical State:
Molecular Weight=
Celsius,Fahrenheit,Reaumur & Thermodynamic Temperature ConversionTemperature=
absolute pressure & gauge pressurePressure=
Density=
specific volumespecific volume=
Specific EnthalpySpecific Enthalpy=
Specific Entropy Specific Entropy =
Composition=



Saturated Vapor Pressure, boiling point (dew point), latent heat of vaporizationare are saturated properties, just enter One parameter to calculate them!
Saturated Vapor Pressure=
Boiling Point=
Latent Heat of VaporizationLatent Heat of Vaporization=
Specific Heat at Constant PressureSpecific Heat(Cp)=
Specific Heat(Cv)=
Adiabatic ExponentCp/Cv=
QualityVapor Quality=
Compression FactorCompression Factor=
Thermal conductivityThermal Conductivity=
Thermal Diffusion CoefficientThermal Diffusivity=
Kinematic ViscosityKinematic Viscosity=
Dynamic ViscosityDynamic Viscosity=
Surface TensionSurface Tension=
Prandtl NumberPrandtl Number=

Comment
Post your comment after login/register. LoginorRegister

View source
×