p-IsoC3enylStyrene,p-Isopropenylstyrene,Benzene,_1-Ethenyl-4-(1-Methylethenyl)-,1-Isopropenyl-4-Vinyl_Benzene,1-Ethenyl-4-(1-Methylethenyl)benzene  Thermodynamic & Transport Properties
CAS Number
Name
Category
Pure Or Mix Name
Chemical Formula
Molecular Weight
Synonym p-IsoC3enylStyrene,p-Isopropenylstyrene,Benzene,_1-Ethenyl-4-(1-Methylethenyl)-,1-Isopropenyl-4-Vinyl_Benzene,1-Ethenyl-4-(1-Methylethenyl)benzene
Molecular Weight
Normal Boiling PointNormal Boiling Point
Critical Temperature Critical temperature
Acentric FactorAcentric Factor
Dipole Momentdipole moment
Heat of Formation J/mol
Heat of Combustion J/mol
Composition
p-IsoC3enylStyrene,p-Isopropenylstyrene,Benzene,_1-Ethenyl-4-(1-Methylethenyl)-,1-Isopropenyl-4-Vinyl_Benzene,1-Ethenyl-4-(1-Methylethenyl)benzene :Introduction
Single Value
Calculation Model ：
Based on Mars Model
Temperature =
Pressure =
Specific Enthalpy =
Specific Entropy =
Reference
Please Login before calculating Loginor Register
p-IsoC3enylStyrene,p-Isopropenylstyrene,Benzene,_1-Ethenyl-4-(1-Methylethenyl)-,1-Isopropenyl-4-Vinyl_Benzene,1-Ethenyl-4-(1-Methylethenyl)benzene :Thermodynamic & Transport Properties Calculated Result
Physical State:
Molecular Weight=
Celsius,Fahrenheit,Reaumur & Thermodynamic Temperature ConversionTemperature=
absolute pressure & gauge pressurePressure=
Density=
specific volumespecific volume=
Specific EnthalpySpecific Enthalpy=
Specific Entropy Specific Entropy =
Composition=



Saturated Vapor Pressure, boiling point (dew point), latent heat of vaporizationare are saturated properties, just enter One parameter to calculate them!
Saturated Vapor Pressure=
Boiling Point=
Latent Heat of VaporizationLatent Heat of Vaporization=
Specific Heat at Constant PressureSpecific Heat(Cp)=
Specific Heat(Cv)=
Adiabatic ExponentCp/Cv=
QualityVapor Quality=
Compression FactorCompression Factor=
Thermal conductivityThermal Conductivity=
Thermal Diffusion CoefficientThermal Diffusivity=
Kinematic ViscosityKinematic Viscosity=
Dynamic ViscosityDynamic Viscosity=
Surface TensionSurface Tension=
Prandtl NumberPrandtl Number=

Comment
Post your comment after login/register. LoginorRegister

View source
×